Leírás
Note:
The relay controller is wifi+rf,the wall switch is rf only.Wall switch itself cannot control lights on off.It needs to work with wifi+rf receiver together.
(1) controller (Receiver)
1) Working voltage: AC85-240V 60HZ/50HZ
2) Working frequency: 433MHZ
3) Power consumption in standby mode: <0.3W
4) Load power: <1100W
5) Receiving sensitivity: -108dBM
6) Working way:wireless control
7) Coding way: learning code
8) Modulation: ASK
9) Working temperature: -10*C~+70″C
10) Size: 47.4*42*22.8 (mm)
(2) Wireless Wall Switch
1) Working voltage: DC3.0V
2) working frequency:433MHZ
3) Power consumption in standby mode:<1uA
4) Transmitter power: <10mW
5) Working way: wireless control
6) Coding way: EV1527 learning code
7) Modulation: ASK
8) Working temperature:-10″C~+70*C
9) Size: 86*86* 15mm
How to get the signal
Step 1: Press the learning button(on the Receiver) twice. Wait for 3 seconds,
Step 2: Press one button on the remote control. Wait for 3 seconds. Succeed.
How to clear the signal
Only one step :Press the learning button(on the Receiver) 8 times. Wait for 3 seconds,
